|
Amplifier : Basic type LAV-10P/Strong power type LAV-11P(Projector), LAV-10A(Receiver) Sensor head : FHM-211-1 or FHM-311 Fiber unit*1 : FHV-321(2m), FHV-351(5m), FHV-411(10m)
|
|
|
|
Steel material with φ100mm or more(FHM-311)
|
|
50m(Detection margin : 10,000 times or more at 10m*2)
|
|
100 to 240VAC(+10%, - 15%, 50/60Hz)
|
|
Projector : 5VA or less, Receiver : 5.5VA or less
|
|
1C relay contact(250VAC 3A, 30VDC 5A, COSφ=1), Photo-coupler(120V, 100mA)
|
|
Light-emitting amount Lowering output
|
|
DC voltage output in proportion to light-receiving amount(Saturated value 9V or more but do not use it except for adjustment)
|
|
Contact output : 40msec or less, transistor output : 30msec or less
|
|
Changeover of DARK-ON/LIGHT-ON
|
|
|
Fiber unit characteristics
|
Allowable bending radius : 100mm, Max. pressure : 784MPa, Tension strength : 490N
|
|
Incandescent lamp : 10,000lux
|
|
Amplifier : -10 to +55°, Sensor head/Fiber unit : -10 to +200°
|
|
|
|
20MΩ or more(1,000V megger between power/output contact and case)
|
|
1,500VAC/min. (Between power/output contact and case)
|
|
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
|
|
490m/s2, Each 3 time in X, Y and Z directions
|
|
Amplifier : IP64(IEC standard) Sensor head : IP66(IEC standard) Fiber unit : Corrugated tube with blade(SUS)
|
|
Amplifier : Aluminum die-casting, Sensor head : Aluminum
|
|
Amplifier : Approx. 950g Sensor head : FHM-211-1 approx. 1.5kg, FHM-311 approx. 4.0kg, Fiber unit : FHV-321 approx. 1.0kg, FHV-351 approx. 1.8kg, FHV-411 approx. 2.8kg
|