Trang chủ »

Tin tức - Sự kiện

Four channel strain gage input boards

Thứ tư, 14 Tháng 12 2011 08:54
Four channel strain gage input boards

The DNA-AI-224 and DNR-AI-224 are high speed, four channel strain gage input boards for UEI's data acquisition and control Cubes and RACKtangle™ Chassis respectively. Suitable for use in a wide variety of applications, these boards provide an ideal combination of high speed, accuracy and connection flexibility. The analog inputs offer 18-bit resolution at sample rates up to 100 kilosamples per second. Each channel has an A/D converter, and all four channels are sampled simultaneously. The combination of the 18-bit resolution with the board's automatic offset zeroing and automatic gain calibration ensures extremely accurate measurements. Each channel also includes an anti-aliasing filter that automatically is configured to match the sample rate.

4-Port Synchronous Serial Interface

Thứ tư, 16 Tháng 11 2011 09:02
4-Port Synchronous Serial Interface

CONTEC Launches New High Performance Thin Embedded PC BX956 Series

Thứ hai, 24 Tháng 10 2011 23:48
CONTEC Launches New High Performance Thin Embedded PC BX956 Series

CONTEC Launches New High Performance Thin Embedded PC BX956 Series

October 24, 2011 Tokyo

New Industrial PC for Embedded with Dual Core Atom

CONTEC CO., LTD. (Tokyo Stock Exchange Code: 6639) today introduced new thin embedded PC series, BOX Computer the BX956 series, that has Intel® Atom™ processor D510 and features only 35 mm-thick body, fanless and slitless design. The BX956 series has just been released.

 

BOX Computer The BX956 Series

Photo : BX-956-DC6000

Model

Video Output

CPU

OS/Storage

BX-956-DC6000

Analog RGB

Fanless Intel® Atom Processor D510

None / None

BX-956-DC6311

WES2009 / CF card 2GB

 

New BOX COMPUTER the BX956 series is a power-saving industrial PC for embedded. This product features a dust-proof construction (slitless), and small body that allows it to be installed in narrow gaps. This series supports Windows Embedded Standard, the OS for embedded equipment, and Windows Embedded Standard is designed for use in embedded systems, so you can use various Windows applications on the BX956 series.
The BX956 series is built on high-performance Dual Core CPU (Intel® Atom™ processor D510) in the fanless and slitless body that features 35 mm thickness and A5-sized footprint.
The most distinctive feature of this series is that its processing ability is more greatly improved than BOX COMPUTER the BX955 series that has same size chassis. Because this new series is based on Hyper-threading-compliant Dual Core CPU that is called Intel® Atom™ processor D510. So, it is possible for simultaneous processing of four threads (CPU usage) to improve simultaneous of multi-processes. This feature offer several benefits. For example, parallel processing application, such as communication processing with other computers, actuator control, graphical screen display and real-time processing, and consolidating some computers into only one BX956. Its other features are mini chassis and variety of standard interfaces. They include 2x 1000BASE-T LAN ports, 4x USB2.0 ports, 2x RS-232C serial ports, 2x CF card slots and audio.

Customization of this product is available. Please contact our sales offices or distributors..

[Features]

  • Optimum computer for digital signage
  • Minimized needs installation space, just A5-sized
  • Slitless & Fanless design reduces need for maintenance
  • Remote power management function reduces need for onsite operation tasks
  • Features variety of standard interfaces, including twin CF card slots
  • Metal fittings and clamps provided to prevent accidental cable disconnection
  • Highly reliable designed for embedded applications
  • Supports a wide range of power supplies from 10.8 to 31.2 VDC

 

Note:

  • The above information was current at the time of release. Some details, including sales status, price, and specifications, may change without notice.
  • Company and product names appearing above are generally trademarks or registered trademarks of the respective trademark holders

The Nex Flow™ Air Amplifiers For Blow off, Cooling and Venting Are Efficient and Heavy Duty Compared to Others

Thứ hai, 17 Tháng 10 2011 14:15
The Nex Flow™ Air Amplifiers For Blow off, Cooling and Venting Are Efficient and Heavy Duty Compared to Others
The Nex Flow™ Air Amplifiers For Blow off, Cooling and Venting Are Efficient and Heavy Duty Compared to Others

The Nex Flow™ Air Amplifiers take compressed air and entrain surrounding air to amplify Air Flow downstream. Often called “Air Movers” they move a tremendous amount of air utilizing the “coanda” effect. The downstream air produced has high velocity and “laminar flow” for strong blow-off an cleaning power.
Advantages:
  • No Moving Parts
  • Quiet
  • Compact
  • Portable
  • No Electricity
  • Low in Cost
  • Superior in Design and Performance
Three versions are available:
Heavy Duty Standard “Fixed Gap” Air Amplfifiers are protective coated, cast zinc and aluminum units which are rugged for factory environments. Some manufacturers produce inferior machined aluminum versions claiming physically impossible amplification ability.
Nex Flow™ Standard Air Amplifiers prove over and over to be better made, with greater efficiency and with honest claims of performance. Stainless Steel shims fix th “air gap” and additional shims may be added for increased output.
More and more companies replace competitive units with the more powerful and efficient
Nex Flow™ units. Units are designed to mount easily onto equipment with built in mounting holes
Anodized Aluminum Adjustable Air Amplifiers are exactly how they are described, adjustable and light weight and used in many OEM applications.
These durable units come with an optional stainless steel mounting bracket (1-1/4” and 2” sizes) for easy mounting. Most others do not even anodize their parts!
Nex Flow™ units are anodized and ever lower in cost than competitors!

Read More...
Applications:
  • Remove water, coolant, dust and scrap in parts manufacturing/assembly operations.
  • Cool enamel and water based paints in parts manufacturing, auto body shops or assembly lines.
  • Blow off of water from the tops of cans, bottles and all types of packaging prior to labeling, ink jetting, palletizing or packaging.
  • Convey light materials and waste- Part ejection, fume removal, dust and liquid blow off from all types of parts.
  • Replace fans for better and faster cooling in many applications- Cool, clean and dry all types of material before painting, coating or polishing.
  • Remove coolant mist form machining operations and to boost existing fume removal systems
  • Cool Steel Forgings.
  • Trim removal in paper, film or foil operations.
View Demo...

Nex Flow™ Frigid-X™ Vortex Tube Tool Cooling System

Thứ hai, 03 Tháng 10 2011 22:26
Nex Flow™ Frigid-X™ Vortex Tube Tool Cooling System
The Nex Flow™ Frigid-X™ Vortex Tube Tool Cooling System is Quiet and Rugged!
A Vortex Tube with hot air out one end (red) and cold the other (blue)
A vortex tube is a device normally designed to work with a standard compressed air supply. Air enters the vortex tube and is “spun” utilizing a par called a “generator” which creates the internal “vortex up inside the vortex tube. Then the air spins back inside the first vortex of spinning air. This causes an energy transfer and this literally splits the air flow into two parts - cold air which exhausts at one end, and hot air which is removed at the other end - all without any moving parts. An adjustable valve at the "hot" end controls the volume of the air flow, and the temperature exiting at the cold end.
By adjusting the valve, you control the "cold fraction" which is the percentage of total input compressed air that exits the cold end of the vortex tubes.
Depending on the size and capacity of the vortex tube as well as inlet pressure and inlet compressed air temperature, the cold end can produce as low as minus 40 degrees F (minus 40 C) or more. Minus 50 F (45.5 C) is possible for some capacities and sizes depending on design as well.
Nex FlowTM manufactures a small and medium size vortex tube with larger sizes possible for special applications.
The small and medium sized Frigid-XTM Vortex Tubes.
The Nex FlowTM small size vortex tube is available to operate on 2 SCFM (57 SLPM), 4 SCFM (113 SLPM) or 8 SCFM (227 SLPM) depending on the interchangeable “H” Model or “C” Model generator used. The larger the flow rate the greater the cooling capacity. The “H” generator isnused for optimum cooing. The 2 SCFM unit provides 145 BTU/hr (42 watts) of cooling, the 4 SCFM unit 290 BTU/hr or 85 watts) and the 8 SCFM unit 580 BTU/hr (170 watts).
The Nex FlowTM small size vortex tube using a
“C” Model generator produces very cold temperatures – again in the three different air capacities listed above.
Advantages for Spot Cooling with Nex FlowTM Frigid-XTM series Vortex Tubes
  • No Moving Parts
  • Quiet
  • Driven By Air, NOT Electricity
  • Small And Lightweight, Portable
  • Milling, Drilling, Routing And Surface Grinding
  • Low In Cost
  • Superior Design And Performance
  • Maintenance Free Operation
  • Made Of Durable Stainless Steel And Metal Arts - NO Cheap Plastic Parts
  • improves Production Rates And Finished Part Remains Dry
  • Prevents Burning
  • Improves Tolerance Control
  • Eliminates Coolant Costs
Customer Report Indicates More Consistency in Quality and Performance than Competitive Models.
One of our long time Nex FlowTM OEM customer was approached to try a competitive vortex tube. They use the 8 SCFM vortex tube with a “C” Model generator. Obtaining a consistently low temperature at a particular setting was extremely important. The stability of the Nex FlowTM vortex tube was important as well as the actually temperature of the unit. The Nex FlowTM vortex tube was not only stable it “consistently” produced a lower temperature compared to the competitive model indicating its superior efficiency.
“Quality” and “Consistency”
Generators are often made of plastic that may not hold up in hot environments. Metal generators made of brass are far preferable along with the use of viton o-rings to seal the space between the generator and the cold outlet end cap. Vortex tubes are used to cool and they often encounter hot environments so all metal with higher temperature O-rings is a far superior design. By machining our generators they may offer greater “consistency” and tighter tolerance than molded plastic generators.
Despite a similar look among various manufacturers, it is what is inside” the vortex tube that you do not see that is important. Proprietary manufacturing techniques and aerodynamic designs used by Nex Flow™ has produced a consistent Frigid-XTM series Vortex Tube that is of high quality in manufacture and performance. The better temperature drop compared to some others, while only slight, can add up to significant savings over the long term because of superior design, manufacturing techniques and quality control.

DNA-IRIG-650

Thứ năm, 22 Tháng 9 2011 10:25
DNA-IRIG-650

DNA-IRIG-650

IRIG-A, B, E and G Timing Generation and Synchronization board
  • IRIG-A, B, E and G output allows cube to provide timing signals
  • IRIG-A, B, E and G input allows cube to synchronize with external IRIG-A, B, E and G sources
  • Modulated or DC level inputs and outputs
  • 1 PPS output
  • Event input captures timing to UTC
  • DNA-GPS input
  • 10 MHz, 1 ppm time base or slaved to external 10 MHz
  • DNA-CBL-650 cable (included with purchase) provides BNC connections for Clock/IRIG signals and 37-pin connections for other I/O
 
JPAGE_CURRENT_OF_TOTAL
Joomlart
Designed: Hien Dai Hoa Jsc